15.7 C
New York
Monday, September 25, 2023

Buy now

Cleaning the drain – what causes blocks and how to fix them

Building users must provide clean water and effectively discharge waste in order to carry out their activities effectively. Proper drainage of waste from buildings ensures a healthy and safe environment for owners and tenants.

Sewers can become clogged for various reasons. Therefore, performing Drain Cleaning Toronto requires the services of an experienced plumber. This ensures proper drainage of waste from the building and provides a clean environment for users.

Why Drain Cleaning?

Gutter cleaning is necessary at one point or another in every building due to clogged drains. A clogged drain can have a variety of causes. A debris that is too large to fit through the drain can flush down the toilet. Hair can run down the sink and build up in the drain, clogging it. Grease and greasy material that normally gets flushed down the sink will stick to the sides of the drain.

Over time, these substances build up and clog drains. Leaves that are not swept and thrown into the trash can easily find their way into drains and clog them. The roots of the tree are also attracted to moisture, which leads to clogged drains. They will break the pipes to reach the water, causing blockages.

Hydrojetter drain cleaning

Plumbers can use hydro jetters to clean drains. A hydrometer is a device that releases water under very high pressure to remove dirt that clogs drains. The hydrometer goes down the drain and pushes it until it reaches the blockage.

Pressurized water breaks the clog into small particles. There is also a nozzle on the side of the hydro jet that creates a spray that removes particles that have stuck to the side of the pipe. The water will push the blockage down the drain, allowing the waste to flow freely without obstruction.

drain snake

A drain snake, also known as a drain auger, is a long, flexible cord made of wire that pushes the drain into the blockage. A motor then rotates the wire at the end of the cord, breaking the obstructive object into tiny particles. These particles are then pushed down the drain to clear the blockage and allow the waste to flow freely down the drain.

Alternatively, a plumber can unclog the blockage and empty the drain. There are also drain snakes that do not use a motor, so the plumber must manually turn the unit until the blockage is trapped and freed.

blockage identification

In order to clean drains efficiently, it is important to know where the blockage is and what the nature of the blockage is. This allows plumbers to use the correct method to clean the drain. A video pipe inspection uses a small camera that is lowered down the pipe to allow the plumber to see inside the pipe and provide an appropriate solution.

Drain cleaning is a process occurring in times when our sewages or household drainage systems have been compromised by several factors and blockages. As serious plumbing problems are common in areas where the populations are high with a limited line of drainage, the problem might pose a risk to the health of those living within the peripheries of those lines. In addition, clogging will normally affect the passage of wastewater which is very damaging to the overall hygiene and outlook of a particular house or home. It is important that we determine with clarity what drain cleaning entails.

Related Articles


Please enter your comment!
Please enter your name here

Latest Articles